TAPER BUSHES

Taper Bushes

Product Code :

The conical bore suitable to the taper bush is located in the center of the components. The taper bush is assembled to this bore. it is manually assembled by sliding to the pin. The set screws are assembled to the clamping bores and if clamped it is assembled in the frequency of press fit. lf the set screws are disassembled and one of them is assembled to the disassemblage bore and it is pressed then the pin and the element will be separated each other.

Advantages

✓ The assemblage is done easily and quickly because it is manually assembled by sliding to the keyway.

✓ it doesn't corrode the mil because the set screws are pressed and fixed the element to the pin and it doesn't cut the keyway because the load isn't on the keyway.

✓ The element isn't frayed because the hammer isn't used in the assemblage.

✓ lf the set screws are disassembled and they are assembled and pressed to the disassemblage place , the element will be separated from the pin and then the disassemblage will be very easy because the disassembled element is taken by hand

PRODUCT PDF
REQUEST FORM
SHARE

SHARE

https://guloz.com.tr/en/products/bushes-and-apparatus/taper-bushes
PRINT
SEND THE MAIL

TECHNICAL DRAWING

TECHNICIAL SPECIFICATIONS

BUSH CODE	HOLE DIAMETER																H mm	TORQUE (Nm)	SCREW	QUANTITY
1008	9	10	11	12	14	16	18	19	20	22	24	25					22,3	136	1/4"	2
1108	9	10	11	12	14	16	18	19	20	22	24	25	28				22,3	147	1/4"	2
1210	12	14	16	18	19	20	22	24	25	28	30						22,3	407	3/8"	2
1610	14	16	18	19	20	22	24	25	28	30	32	35	38	40			25,4	486	3/8"	2
2012	18	19	20	22	24	25	28	30	32	35	38	40	42	45	48	50	31,8	808	7/16"	2
2517	20	22	24	25	28	30	32	35	38	40	42	45	48	50	55	60	44,5	1.310	1/2"	2
3020	25	28	30	32	35	38	40	42	45	48	50	55	60	65	70	75	50,8	2.710	5/8"	2
3030	25	28	30	32	35	38	40	42	45	48	50	55	60	65	70	75	76,2	2.710	5/8"	2
3525	35	38	40	42	45	48	50	55	60	65	70	75	80	85	90		63,5	3.800	1/2"	3
3535	35	38	40	42	45	48	50	55	60	65	70	75	80	85	90		88,9	5.060	1/2"	3
4040	40	42	45	48	50	55	60	65	70	75	80	85	90	95	100		101,6	8.740	5/8"	3
4545	45	48	50	55	60	65	70	75	80	85	90	95	100	110			114,3	12.400	3/4"	3
5050	50	55	60	65	70	75	80	85	90	95	100	110	115	120	125		127	14.200	7/8"	3
6050	70	75	80	85	90	95	100	110	115	120	125	130	140	150			127	31.900	1 1/4"	3
7060	90	85	90	95	100	110	115	120	125	130	140	150	160	170	175		152	47.000	1 1/4"	4
8065	90	95	100	110	115	120	125	130	140	150	160	170	175	180	190	200	165	51.000	1 1/4"	4
10085	110	115	120	125	130	140	150	160	170	175	180	190	200	220	240	250	215	98.200	1 1/4"	4
120100	150	160	170	175	180	190	200	220	240	250	275	300					254	172.000	1 1/4"	6