Gülöz Makina
WhatsApp

How to Select the Right Coupling

A shaft coupling connects two shafts, for example a motor and a gearbox or pump, and transmits torque between them. A wrongly selected coupling leads to bearing and seal failures, vibration, energy loss and unplanned downtime. Here are the five criteria to check and how the main coupling types differ.

1. Calculate the torque

T (Nm) = 9550 × P (kW) / n (rpm). Example: a 15 kW motor at 1450 rpm gives T = 9550 × 15 / 1450 ≈ 99 Nm.

2. Apply a service factor

Multiply the nominal torque by a service factor based on the driven machine: low for fans and centrifugal pumps, high for crushers, presses, conveyors and reciprocating compressors. Long daily operation and frequent starts increase it further. The coupling's rated torque must exceed T × service factor.

3. Check shaft sizes and speed

Both hubs must accept the shaft diameters and keyways, and the coupling's maximum speed must exceed the operating speed.

4. Consider misalignment and damping

Shafts are never perfectly aligned. Flexible couplings accommodate angular, radial and axial misalignment and damp shocks, protecting bearings. For servo and positioning applications, choose backlash-free couplings.

5. Operating environment

Temperature, oil, chemicals and dust determine the elastomer material. Some designs allow the flexible element to be replaced without moving the motor.

Coupling types

Gülöz coupling types compared

Coupling type Rated torque range (Nm) Max. speed (rpm)
Backlash-free servo coupling 6 – 577 16,000
GEK steel servo coupling 24 – 2,612 8,000
Tyre coupling 67 – 8,496 5,000
HRC coupling 33 – 3,960 7,000
Pin & bush coupling 43 – 193,921 6,750
CD disc coupling 23 – 121,930 11,000
ZL flexible gear pin coupling 367 – 597,272 4,000
Gear coupling 1,484 – 196,247 6,500

Values from the Gülöz 2026 catalogue; they vary with size and elastomer hardness.

Quick selection checklist

  1. Motor power (kW) and speed (rpm)
  2. Driven machine type → service factor
  3. Both shaft diameters and keyways
  4. Distance between shaft ends and available space
  5. Expected misalignment, temperature and environment

Send us these details and our engineers will recommend the right coupling and bore sizes. Browse all couplings or request a quote.

Other News
View the All

06
February

OUR WEBSITE HAS BEEN RENEWED

We have renewed our website in order to serve you better.

Read More >>>

11
October

HOW TO SELECT THE RIGHT COUPLING

Torque calculation, service factor and coupling types compared.

Read More >>>

06
February

WHAT IS A TAPER LOCK BUSH AND HOW TO INSTALL IT

Taper lock bush sizes, step-by-step installation and removal.

Read More >>>

05
February